Aligning The Print Head - Epson Stylus C42 Series User Manual

Aligning the Print Head

If your printouts contain misaligned vertical lines, you may need to align the print
head. Your printer must be connected directly to your computer (not over a network)
to use the Print Head Alignment utility.
Load plain paper that's at least 21.0 cm (8.27 in) wide to prevent ink
from spraying inside the printer and smudging your printouts.
1. Make sure the printer is turned on, but not printing, and letter-size plain paper is
loaded.
2. Do one of the following:
I
Windows: Right-click the
corner of your screen) and select
I
Macintosh OS 8.5.1 to 9.x: Open the File menu and choose
Then click the
Print.
Print Head Alignment
I
Macintosh OS X: Double-click the
Double-click
Printer List window, and click
button.
3. Follow the instructions on the
screen to print a test page. You see
this window:
4. On the printed page, select the
pattern that shows the two vertical
lines most precisely printed on top
of each other. You may need to use
a magnifying glass.
Select one pattern each for rows 1,
2, and 3. Then enter the number of
the best pattern for each row in the
corresponding boxes on the screen.
printer icon on your taskbar (in the lower right
button. In the Utility menu, click the
Utility
button.
EPSON Printer Utility
OK
Print Head Alignment
folder on your hard drive.
Applications
, select the
C42 Series
. Then click the
.
Page Setup
printer in the
Print Head Alignment
Maintaining Your Printer
or
29