Samsung SPH-M350 Online Manual page 116

to adjust white balance based on
White Balance
changing conditions (
or
Fluorescent, Manual
to activate low light image capture.
Night Shot
Enabling this feature allows you to take better
quality photos in low light conditions.
to allow the phone to sample the area
Metering
being photographed and then determine the best
light levels. Choose from either
area of the image) or
sampled and then an average reading is used).
to select
Settings.. Resolution
or
Status Bar Storage
details.)
to Review Pictures or launch the Camcorder.
Launch
Setting the Selftimer
1.
From camera mode, press
Selftimer.
2. Highlight the length of delay you want the timer to
use ( or
5 sec 10 sec
(The default setting is
110 Section 2I. Camera
Auto, Sunny, Cloudy, Tungsten,
). (The default setting is
(a specific
Spot
(the entire image is
Average
, ,
Quality Shutter Sound
. (See Camera Mode Options for
(right softkey)
Options
) and press .
Off .)
3.
Press
(The timer displays on the middle-right portion of
.) the display screen during the self-timer
Auto
countdown).
4.
Get ready for the picture. (The phone will beep for
each second of the countdown, and the outer LED
will blink green. When the timer is down to three
seconds, the outer LED will blink red. Just before
the picture is taken, the LED turns solid red.)
To cancel the selftimer after it has started:
Press
,
Note While the sefltimer is active, all keys are disabled
except
Taking Multiple Shots
This feature allows you to take a series of shots in a
continuous sequence.
>
To shoot a series of individual pictures:
1.
From camera mode, press
Multi Shot > Series Shot.
2. Select one of the following options and press
to deactivate the multiple shots option.
Off
when you are ready to start the timer.
or .
and
.
Options
(right softkey)
>
: