Attaching An External Flash Unit - Casio QV-2400UX User Manual

Attaching an External Flash Unit

Always make sure that the external flash unit is turned off
before attaching it to detaching it from the camera. Leaving
the flash unit on can cause it to fire unexpectedly.
1.
Point the lens of the camera straight forward,
so it matches the optical axis of the external
flash.
2.
Attach the external flash unit to its bracket,
and affix the bracket to the camera's tripod
hole.
• If you are using a grip type flash unit, affix the flash
unit directly to the camera's tripod hole.
3.
Remove the terminal cap and attach the flash
unit's sync cable to the external flash sync ter-
minal.
CONNECTING TO EXTERNAL EQUIPMENT
E-130
Tripod hole
External flash
sync terminal
Terminal cap
• Make sure you do not misplace the terminal cap. Al-
ways keep the terminal covered when an external
flash unit is not connected.
External
flash unit
Bracket
Sync cable