Using The Self-Timer - Casio QV-2400UX User Manual

IMPORTANT!
• The values in the table below are all approximate, and
are affected by the types of images you record and
other factors.
• Saving two versions of an image in JPEG and TIFF
formats creates a file that is very large, and greatly
reduces storage capacity (page E-92).
• To determine the number of images that can be stored
on a memory card of a different capacity, multiply the
capacities in the table below, by the appropriate value.
• Note that the maximum number of images that can be
stored in a single folder is 250. Because of this, even
if you are using a card that allows storage of more
than 250 images, the camera's monitor screen will
show its capacity for up to 250 images only.
• The number of images that can be recorded may differ
from the values shown above when you use Card
Browser (page E-140).
BASIC IMAGE RECORDING
You can set the self-timer to either one of two starting times.
1.
Enter the REC mode.
2.
Press the
to select the self-timer
time you want.
Self timer
Time
Self-timer Time Settings:
Each press of
timer settings described below.
E-61

Using the Self-timer

button
SHIFT
INFO
cycles through the available self-
MF
RESIZE