General Graph Settings (Set) - Casio FX-9750G Quick Start Manual

18 - 2
Paired-Variable Statistical Calculation Examples

2. General graph settings (SET)

This section describes how to use the general graph settings screen to make the
following settings for each graph (GPH1, GPH2, GPH3).
• Graph Type
The initial default graph type setting for all the graphs is scatter graph. You can select
one of a variety of other statistical graph types for each graph.
• List
The initial default is statistical data List 1 for single-variable data, and List 1 and List
2 for paired-variable data. You can specify which statistical data list you want to use
for
• Frequency
Normally, each data item or data pair in the statistical data list is represented on a
graph as a point. When you are working with a large number of data items however,
this can cause problems because of the number of plot points on the graph. When
this happens, you can specify a frequency list that contains values indicating the
number of instances (the frequency) of the data items in the corresponding cells of
the lists you are using for
plotted for the multiple data items, which makes the graph easier to read.
• Mark Type
This setting lets you specify the shape of the plot points on the graph.
u u u u u To display the general graph settings (SET) screen
While the graph menu is on the display, press 6 (SET) to display the general graph
settings screen.
• The settings shown here are examples only. The settings on your general graph
u u u u u To select the StatGraph area
1. While the general graph settings screen is on the display, use f and c to
x y
-data and -data.
1(GRPH)
6(SET)
settings screen may differ.
move the highlighting to the StatGraph item.
x y
-data and -data. Once you do this, only one point is
1 2 3 4 5 6
288