Casio Exilim EX-H10 User Manual page 15

4.
Turn off the camera and
then use the USB cable
that comes with the
camera to connect it to
your computer.
• The camera does not
draw power over the USB
cable. Make sure the
camera's battery is
sufficiently charged
before connecting.
• Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert
the connector fully can
result in poor
communication or
malfunction.
USB port
_p_ USB cable
/! _II_S/allcOnnectOr
USB/AV -- ;-9_
Making sure that the I_ mark on the camera is
aligned with the _ mark of the USB cable connecter,
connect the cable to the camera.
Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
Your computer may not be able to recognize the camera
if you connect via a USB hub. Always connect directly to the computer's USB
port.
5. Turn on the camera.
6. Windows Vista users: Click "Start" and then "Computer".
Windows XP users: Click "Start" and then "My Computer".
Windows 2000 users: Doubleclick "My Computer".
7. Double-click"Removable Disk".
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
118
Using the Camera with a Computer