Casio Exilim EX-H10 User Manual page 11

• Date Stamping
You can use one of the following three methods to include the recording date in the
3rintout of an image.
Configure DPOF settings (page 112).
You can turn date stamping on and off each time you print. You can configure
settings so some images include the date stamp and some don't.
Configure the Camera's Time Stamp setting (page 138).
• The camera's Time Stamp setting imprints the date into a snapshot when you
shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date
stamped with the camera's Time Stamp function. Doing so can cause the two
stamps to be overprinted.
You can use commercially available image management software to date
stamp images.
Request date stamping when ordering prints from a professional print service.
• Standards Supported by the Camera
• PictBridge _
This is a standard of the Camera and Imaging Products Association
(CIPA). PictBridge
• PRINT Image Matching II[
Using image editing software and printing on a printer that supports
PRINT Image Matching II[ makes it possible to use information about
shooting conditions that is recorded with the image, and produce
exactly the type of image you want. PRINT Image Matching and
PRINT Image Matching II[ are trademarks of Seiko Epson Corporation.
• Exif Print ,eee,,
Printing on a printer that supports Exif Print (Exif 2.2)uses EXif PfiRt
information about shooting conditions recorded with the image to
enhance printed image quality. Contact your printer manufacturer
for information about models that support Exif Print, printer upgrades, etc.
114 Printing