Paper Feed Or Paper Jam Problems - Epson 880 Daily Use

Check the black and
flashing, replace the ink cartridge. See "Replacing Ink
Cartridges" on page 31.
Blurry or smeared printout
Try one or more of these solutions:
Make sure that the printable side of the paper is face up in the
sheet feeder.
Make sure that your paper is not damaged, dirty, or too old.
Set the adjust lever to the "+" position, and make sure that the
Media Type setting in your printer driver is correct.

Paper feed or paper jam problems

If the paper does not feed, feeds multiple pages, or the paper is
jammed, remove and reload the stack of paper, then press the
load/eject button. Also, make sure the following:
The paper is not creased or too old.
The paper is not loaded above the arrow on the left edge
guide.
The edge guides are set correctly.
The paper is not too thin or too rough. Use paper that meets
the paper specifications for this printer. See the online
Reference Guide for paper specifications.
To ensure that no pages are skipped and the document is printed
correctly when using the double-sided printing feature, make
sure that page settings in your application are correct and that the
paper is loaded properly.
color ink out lights. If a light is
46