Adding A Date Stamp - Canon POWERSHOT SX160 IS User Manual

Common, Convenient Features
(_ For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the
flash fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp wil!
remain lit in case the flash fires.)
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (_[_17).
Configure the setting.
Press the
<MENU>
button, choose [Date
Stamp] on the [O] tab, and then choose
the desired option (_[_38).
Once the setting is complete, [DATE] is
displayed.
Shoot.
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
To restore the original setting, choose
[Off] in step 1.
52