Table of Contents
Advertisement
Possible cause
You tried to print on
cardboard or other
non-recommended
media.
The Media Type
setting doesn't match
the loaded paper.
Ink has leaked inside
the printer.
You're using the High
Speed and
MicroWeave settings
with a misaligned print
head.
The resolution of your
image may be too low.
Troubleshooting
Solution
Make sure your paper or media meets the specifications listed in Paper.
If your printouts are still blurry after you change paper, clean the print
head as described in
Cleaning the Print
Make sure the Media Type setting matches the paper you're using. See
Printing from Windows
Clean carefully inside the printer to remove spilled ink. See
Printer
for instructions.
Turn off High Speed following the instructions in
Quality and Special
Effects. Then run the Print Head Alignment utility
following the instructions in
If a photographic image looks grainy or rough, try using the
PhotoEnhance3 (PhotoEnhance on Windows 3.1) and Sharpness
setting to improve the printed quality. See
details. You can also increase the image resolution using your
image-editing software, or decrease the size of the image.
Head.
or
Printing from a Macintosh
Aligning the Print
Customizing Color Settings
for instructions.
Cleaning the
Customizing Print
Head.
Page 145
for
Advertisement
Table of Contents
