Canon POWERSHOT S500 User Manual page 37

When shooting or playing back images, the shooting information or play
back information appears on the LCD monitor,
J! I It _
When setting the flash, continuous mode, self-timer, macro mode, infinity m
mode, or the metering method, the shooting information displays on the _, iiiiiiii
,co m on,tor ferapprox,mate,y seconds even gthe,CO mon,ter ,e set to
[Standard (No Information)] or [Off]. (It may not display under some =
circumstances, depending on the selected settings,) _'
6
= iii
lighting if the upper indicator beside the viewfinder blinks orange after
the metering preparations are complete and the camera shake icon
[] appears in the LCD monitor. Set the flash to [] or I[t, or affix the
camera to a tripod to shoot.
• Right after a shot is taken, the image and its information appear in
the LCD monitor for 2 seconds (or for the number of seconds
selected if the review time was changed (2 - 10 sec.)) even if you
release the shutter button, if the SET button is pressed while an
image is displayed, it will continue to display (p. 54)
• While a recorded image is displayed on the LCD monitor, you can
check the exposure with the graph (see Histogram Function p.38)
that shows the distribution of the [)rightness data. If the exposure
requires adjustment, set the exposure compensation and reshoot.
(Press the DISP. button if the histogram and other information is not
shown)
iiiiii