Canon EOS REBEL T4I Instruction Manual page 28

Charging the Battery
_ Remove the protective cover.
_ Detach the protective cover provided
with the battery.
Attach the battery.
_ As shown in the illustration, attach the
battery securely to the charger.
_ To detach the battery, follow the
above procedure in reverse.
LC-E8
LC-ESE
_,_ Recharge the battery.
For LC=E8
_ As shown by the arrow, flip out the
battery charger's prongs and insert
the prongs into a power outlet.
For LC-E8E
_ Connect the power cord to the
charger and insert the plug into a
power outlet.
_y,, R echarging starts automatically and
the charge lamp lights up in orange.
_y,, W hen the battery is fully recharged,
the full-charge lamp will light up in
green.
_ it takes approx. 2 hours to fully recharge a completely
exhausted battery at 23°C / 73°F. The time required to recharge
the battery will vary greatly depending on the ambient
temperature and the battery's remaining capacity.
_ For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take longer (up to approx. 4 hours).
28