Canon EOS REBEL T4I Instruction Manual page 31

Installing and Removing the Card
The card (sold separately) can be an SD, SDHC, or SDXC memory
card. SDHC and SDXC cards with UHS-I can also be used. The
captured images are recorded onto the card.
_L_ Make sure the card's write-protect switch is set upward to
enable writing/erasing.
installing the card
Open the cover.
®_Slide the cover as shown by the
arrows to open it.
Write-protect switch _
Insert the card.
_ As shown by the illustration, face
the card's label side toward you
and insert it until it clicks in place.
Possible shots
3
Close the cover.
_ Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
_ When you set the power switch to
<ON>, the number of possible shots
(p.35) will be displayed on the LCD
monitor.
[_ _ The number Of possible Shots depends 0n the remaining capacity Of the
card; image_[ecording qua!ity, ISO speed, etc.
¢_ Setting [_1: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card (p.200).
31