Canon POWERSHOT A810 User Manual page 93

Adjusting Basic Camera Functions
_ Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press the
[] button in Shooting mode (p. 40). To have the lens retracted immediately
after you press the [] button, set the retraction timing to [0 sec.].
Choose [Lens Retract], and then choose [0
sec.].
L Power=Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (p. 40).
Access the [Power Saving] screen.
Choose [Power Saving], and then press the
@ button.
Configure the settings.
After choosing an item, press the _ _ buttons
to adjust it as needed.
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
129