Canon POWERSHOT A810 User Manual page 103

Using Optional Accessories
insert the coupler.
Insert the coupler facing the direction shown,
just as you would a battery (following step 2
on p. 18).
Make sure the coupler cable passes through
the port.
Close the cover.
Lower the cover (1(_) and hold it down as you
slide it until it clicks into the closed position
(_)).
Connect the power cord.
Insert the adapter plug into the end of the
coupler cable.
Insert one end of the power cord into the
compact power adapter, and then plug the
other end into a power outlet.
Turn the camera on and use it as desired.
When finished, turn the camera off and
unplug the power cord from the outlet.
(_) Do not disconnect the adapter or unplug the power cord while the
camera is still on. This may erase your shots or damage the camera.
Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
139