Using The Optical Disc Drive - Toshiba C660D User Manual

■

Using the optical disc drive

The full-size drive provides high-performance execution of CD/DVD-based
programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs
without an adaptor. A Serial ATA interface controller is used for CD/DVD
operation.
Use the TOSHIBA VIDEO PLAYER application to view DVD-Video discs.
For precautions on writing to CD/DVDs, refer to the
section.
Loading discs
To load a disc, follow the steps as detailed below:
1. When the computer's power is on, press the eject button to open the
disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
1. Disc tray
3. Lay the disc, label side up, in the disc tray.
User's Manual
If authentication was successful, but an authentication error
subsequently occurred during the login to Windows, you will be
asked to provide your account information.
Pressing the eject button and pulling the disc tray open
Important message
2
2. Eject button
Operating Basics
1
4-6