Program Screen - Toshiba W7 Installation And Operation Manual

PID Feedback — Displays the instantaneous PID feedback value.
Post Compensation Frequency — Displays the output frequency of the ASD after the application of
the waveform adjustment compensation for changes in the input voltage.
Run Time — Displays the accumulated run-time since the last reset or power up of the ASD.
Output Terminals — Shows the active discrete output terminals.
Input Terminals — Shows the active discrete input terminals.
Output Voltage — Shows the instantaneous output voltage as a percentage of the rating of the ASD
or as a voltage (see
DC Voltage — Shows the instantaneous DC bus voltage as a percentage of the rating of the ASD or
as a voltage (see
Output Current — Shows the instantaneous output current as a percentage of the rating of the ASD
or as a current (see
Frequency Command — Displays the current frequency command.

Program Screen

The Program Menu allows the user access to parameters that setup the input and output specifications
of the W7 ASD. Many of these settings are application-specific and will require setup. The Setup
screen provides easy-access to the most common setup parameters. See the section titled
Navigation on pg. 35
assistance.
34
Units for Voltage and Current on pg.
Units for Voltage and Current on pg.
Units for Voltage and Current on pg.
for a complete listing of the W7 ASD parameters and for menu navigation
133).
133).
133).
W7 ASD Installation and Operation Manual
Program Menu