Connecting To Your Video Cassette Recorder; Switching On For The First Time; Inserting Batteries In The Remote Control - Topfield TF 7710 HSCI User Manual

14 Setup

2.4.3 Connecting to your video cassette recorder

2.5 Switching on for the first time

2.5.1 Inserting batteries in the remote control

The digital receiver can also output video to another appliance
such as a video cassette recorder or video receiver through an
auxiliary SCART connector.
Now that you have your digital receiver connected, you should
plug it in to a mains socket. Ensure that your television set is
turned on, so that you will be able to see the display from the
digital receiver.
To insert the batteries, open the battery compartment by remov-
ing the lid, and then insert the batteries observing the polarity,
which is marked on the base of the battery compartment.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
To enjoy Dolby digital audio, your televi-
sion or audio system must be able to decode
Dolby digital audio, and you will need to ob-
tain a S/PDIF cable.
cable into the S/PIDF socket on the digital
receiver, and the other end into the matching
socket on your audio system.
You will need to obtain a SCART cable to use
the auxiliary SCART connector. Plug one end
of the cable into the VCR socket on the digital
receiver, and the other end into the match-
ing socket on your video cassette recorder or
suchlike.
Plug one end of the