Interfaces; Environmental - Pentax 3 User Manual

Paper Type
Paper Loading
Form Feed Modes

Interfaces

USB
IrDA
Bluetooth

Environmental

Temperature
Humidity
Custom
4.13" (105mm) x 1.00" (25.4mm) minimum
8.6" (218.5mm) x 27 feet (8.23 m) (at 200
dpi) max.
8.6" (218.5mm) x 18 feet (5.49 m) (at 300
dpi) max.
(14" (355.6 mm) maximum length
recommended)
Thermal—Cut Sheet, Roll Paper,
Perforated Roll, or Fanfold Paper
Manual—Single Sheet or Roll
No Feed Mode
Fixed Page Mode
End of Page Mode
Printer: USB "Mini-B"
(Using USB 1.1 "High Speed")
Host: USB "A"
Tiny TP extension to IrLMP, IrCOMM
(COM port emulation using 3 wire "cooked"
serial mode [IrLPT]), and IrOBEX, vCard,
vCal and vMSG (text portions only).
2402~2480MHz ISM band, 79 x 1MHz,
SPP Protocol, Pairing/PIN supported.
Factory default = PIN disabled.
Operating: 14º to 113º F (-10º to 45º C)
Note: Operation at low temperatures may
slow the printer or cause it not to print at all.
Storage: 5º to 122º F (-15º to +50º C)
Operating: 30-80% RH, non-condensing
Storage: 30-85% RH, non-condensing
Page 64