Removing The Border Embroidery Frame; Embroidering The Next Pattern - Brother CE8080PRW Operation Manual

■ Removing the Border Embroidery Frame

Note
• Before removing the border embroidery frame from
the embroidery unit, make sure that the embroidery
unit carriage has moved to its initial position.
a
Raise the frame-securing lever and pull the
border embroidery frame toward you.
• If the thread has become tangled and the
embroidery unit carriage does not move to its initial
position, even after the thread is cut, turn off the
machine, manually move the carriage, and then
remove the border embroidery frame.
• Only move the embroidery unit carriage when the
machine is turned off.
8
CAUTION
OFF

■ Embroidering the Next Pattern

a
Press both lock release buttons and slide the
fabric to align the embroidering area of the
next pattern, and rehoop the fabric in the
border embroidery frame.
Note
• Adjust the position of the fabric so that the
embroidering area for the next pattern is within the
embroidering area of the embroidery sheet.
a
Pattern embroidered first
b Position of pattern to be embroidered next
c
Embroidering area of embroidery sheet
b
Attach the border embroidery frame to the
embroidery unit, and then press .