Embroidering The First Pattern; Removing The Border Embroidery Frame - Brother Duetta 4500D Operation Manual

■ Embroidering the First Pattern

Note
• When the border embroidery frame is used, the
embroidering time may be slightly longer than the
time that appears in the screen, depending on the
type of fabric and pattern that is used.
a
To check the embroidering area, press
b
Thread the machine, and then start
embroidering.
• Do not touch the border embroidery frame while
embroidering.
→ When embroidering is finished, the thread mark is
sewn with the last thread color.
8
CAUTION

■ Removing the Border Embroidery Frame

Note
• Before removing the border embroidery frame from
the embroidery unit, make sure that the embroidery
unit carriage has moved to its initial position.
a
Raise the frame-securing lever and pull the
.
border embroidery frame toward you.
• If the thread has become tangled and the
embroidery unit carriage does not move to its initial
position, even after the thread is cut, turn off the
machine, manually move the carriage, and then
remove the border embroidery frame.
• Only move the embroidery unit carriage when the
machine is turned off.
CAUTION
OFF