Kit Roll Pinch Removal - Lexmark W820 - Optra B/W Laser Printer Service Manual

Kit Roll Pinch Removal

Removal
1.
Open the Top Center Cover Assembly.
2.
Remove the screw that secures to the Finisher from the Pinch Roll, and remove the
Pinch Roll and Spring Plate.
3.
Loosen the bracket of the Pinch Roll, and remove the roller of the Pinch Roll.
4.
Repeat step 3 until you have removed all, or the necessary, rollers of the Kit Roll
Pinch.
Replacement
1.
Loosen the bracket of the Pinch Roll, and mount the roller of the Pinch Roll.
2.
Align the Pinch Roll and Spring Plate with the mounting position in the Finisher, and
secure it with a screw.
3.
Repeat the above steps until you have mounted all the Kit Roll Pinch.
4.
Close the Top Center Cover Assembly.
4025-Finisher
Removal and Replacement Procedures
4-57