Restoring Default Settings - Epson Stylus Photo R380 Printer Basics Manual

Borderless Expansion
When you print borderless photos, your image is slightly expanded and cropped to
fill the sheet of paper. If too much of your photo edges are cut off, you can adjust
the expansion setting as described below.
1. Press the
Print Settings
2. Press u to choose
3. If too much of your photo edges are cut off, select
expansion). If you see a white edge on your photo, select
4. Press to save your setting.
OK
Fit to Frame
If your photo is too long or wide to fit inside the available
space on your selected layout, part of the image is
automatically cropped. If you want your entire image to
print with white space filling in the rest of the print area, you
can turn off fit to frame.
To turn automatic cropping off or on:
1. Press the
Print Settings
2. Press d or u to select
3. Select or
Off On

Restoring Default Settings

Follow these steps to return all the printer settings to the factory defaults:
1. Press the
Setup
2. Press l or r to select
3. Press again to restore settings to their factory defaults.
OK
button.
, then press r.
Expansion
button.
, then press r.
Fit Frame
, then press .
OK
button.
Restore Default Settings
, or (least
Mid Min
Standard
Cropped area
Fit to Frame turned on
Fit to Frame turned off
, then press
OK.

Restoring Default Settings

.
27