Operating Instructions For Color Video Monitor TCM-0902 / TCM-1001 TCM-1002S / TCM-1402S TCM-1501 / TCM-1701 TCM-1901 / TCM-2102S TATUNG Company Of America...
Table of Contents 1. FCC Information 2. Safety Precautions 3. General Features 4. TCM-0902 Monitor Front and Rear Views 5. TCM-1001 HI-RES. Monitor Front and Rear Views 6. TCM-1002S Monitor Front and Rear Views 7. TCM-1402S Monitor Front and Rear Views 8.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 5
7. Route power cords so that they cannot be walked upon or tripped over. Do not allow anything to rest on the power cord. 8. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not spill liquid of any kind on the unit.
GENERAL FEATURES 1. Compatible With : NTSC / PAL System 2. Scanning System : NTSC, 525 Lines, 60 Hz or PAL, 625 Lines, 50 Hz 3. Video Input Signal : CVBS1 / CVBS2 / S-Y/C 4. Audio Input Signal : AU1 / AU2 5.
OPERATION Operating Instructions 1. Place the monitor on a flat and firm surface (see Safety Precautions on page 2). 2. This monitor can be operated between 100VAC to 240VAC. 3. Plug the power cord into AC outlet on the wall. 4.
To reduce the risk of electrical shock, do not remove the cover or back of monitor. No user- serviceable parts are inside. Refer servicing to qualified personnel, or contact the Tatung Customer Service Department for assistance. Refer to the Warranty and Return Information section.
Page 17
MODEL TCM-1001 TCM-1501 TCM-1701 TCM-1901 ELECTRICAL Input Voltage 100~240V AC, 60 / 50HZ , full range Power Consumption Horizontal 700 lines, Y/C 700 lines, Y/C 700 lines, Y/C 700 lines, Y/C Resolution more than 800 more than 800 more than 800 more than 800 lines lines...
RACK MOUNT KIT TRD-294 TRD-294 can hold two 9” CRT monitors side by side mounting on the rack, monitor model: TCM-0902, TBM-0903. The installation procedure is simple: 1. Unscrew 4 rubber-foot from bottom of each monitor. 2. Secure monitors with TRD-294 bracket (FIG. 1) by using the screws and adapter bars provided in the package.
Page 19
RACK MOUNT KIT TRK-141 TRK-141 used for rack mount of 14” or 15” CRT color monitors, model: TCM1402S and TCM-1501. The installation procedure is simple: 1. Unscrew two Screw (M5 x 10mm) on each side of the monitor. 2. Secure TRK-141 bracket to both side of the monitor with the screw provided in the package. (FIG.
Page 20
RACK MOUNT KIT TRK-171, TRK-191 TRK-171 used for mount 17” CRT color monitor TCM-1701 on the rack. TRK-191 for 19” monitor, model: TCM-1901, VT19726DVR. The installation procedure is simple: 1. Unscrew three Screws (M6) on each side of the monitor. 2.
Page 21
TATUNG COMPANY OF AMERICA 2850 EL PRESIDIO ST. LONG BEACH, CA90810 (800)827-2850 3121-0266-09...