Epson 900 User Manual page 71

If your printout is blurry or
smeared . . .
Make sure your paper isn't damp or
loaded face down (the printable side
should be loaded face up). If it's
damp, reload a new stack of paper.
Use a support sheet with special
media or try loading your media
one sheet at a time.
Make sure your paper or media
meets the specifications listed in
your electronic EPSON Stylus
COLOR 900 Manual.
Run the Print Head Alignment
utility. See page 56 for instructions.
Check the paper thickness lever
position. If it's in the
your printer is set for thicker paper
or envelopes and your image may
smear. For most papers, set the paper
thickness lever to the
shown on the facing page.
position,
+
position, as
0
If your printout is faint or has gaps
in the image . . .
Make sure the print head nozzles are
not clogged. To clean the print head,
see page 48.
Make sure your paper isn't damaged,
old, dirty, or loaded face down. If it
is, reload a new stack of paper with
the printable side up. The printable
surface is usually whiter or shinier.
65