Epson 900 User Manual page 69

If your printer icon doesn't appear
in the Chooser (Macintosh) . . .
Your Macintosh has extension
conflicts. Disable Quick Draw GX
in the Extensions Manager. Make
sure EPSON Monitor3 and
SC 900 are enabled, and then
restart your Macintosh.
You may have too many items in
the Chooser. Delete any unused
items and check the Chooser
again.
If you can't install the USB Printer
Device driver for Windows 98 . . .
Make sure your computer is a
Windows 98 USB pre-installed
model.
Make sure that the Universal
Serial Bus Controller is working
properly in the Device Manager.
For details, see your computer
documentation. If it is not
working properly, contact your
computer dealer.
Make sure you're using a
recommended USB cable as
described on page 4.
If you use a USB hub, connect the
printer to the first tier of the hub,
or connect the printer to the
computer's USB port directly.
If you want to verify your USB
software installation on
Windows 98 . . .
Check the Device Manger: Click
, point to
Start Settings
. Then double-click
Control Panel
and click the
System
tab. You should see the
Manager
device EPSON USB Printer Devices
listed. Click the next to the device;
+
you should see EPSON USB Printer
(EPUSB:1) listed.
If you can't see the ink level gauge
when you print in Windows . . .
Make sure you installed Status
Monitor 2. If you didn't, uninstall
your printer software, then reinstall
it, making sure you choose to install
Status Monitor 2. See page 67 for
instructions on uninstalling your
printer software. Once you've
installed Status Monitor 2, make
sure background monitoring is
turned on. See your electronic
EPSON Stylus COLOR 900 Manual
for details on Status Monitor 2.
(Status Monitor 2 is not available for
Windows 3.1.)
, and click
Device
63