2.3
1x5 Cabling
2.3.1
SCSI Cabling
2.3.1.1
Cable Lengths
The following table shows the lengths of each SCSI cable connected to the drive
connections on the controller module.
TABLE 2-6
SCSI Port Number
1
2
3
4
5
The inboard IN/OUT connectors on each of the disk arrays are connected together
using a 0.2m SCSI jumper cable, part number 530-1883-xx.
The outboard IN/OUT-2 connector on each disk array is terminated with a
differential SCSI terminator, part number 150-1890-xx.
2-14
Sun StorEdge A3500 Hardware Configuration Guide • September 1998
Controller Module A (1x5)
Cable Length
2m
2m
2m
2m
2m
Part Number
530-1885-xx
530-1885-xx
530-1885-xx
530-1885-xx
530-1885-xx