Scsi Jumper Cables And Terminators - Sun Microsystems Sun StorEdge A3500 Configuration Manual

2.1.2.2 Module ID Switch
Ensure that the module IDs for the StorEdge D1000 disk arrays are set according to
TABLE 2-1
TABLE 2-1
Disk array number
5 (Top)
4
3
2
1 (Bottom)
2.1.2.3

SCSI Jumper Cables and Terminators

All disk arrays in this configuration should have SCSI jumper cables between the
middle SCSI connectors (IN/OUT-1 and IN/OUT-2) and a differential SCSI
terminator in the far right SCSI connector (IN/OUT-2). This configuration is shown
in
FIGURE 2-15
2-6 Sun StorEdge A3500 Hardware Configuration Guide • September 1998
.
1x5 Module ID Switch Settings
Module ID setting
5
4
3
2
1
.