1X2 Cabling; Scsi Cabling - Sun Microsystems Sun StorEdge A3500 Configuration Manual

2.2

1x2 Cabling

The 1x2 can be configured with the controller module either on top of or below the
two disk arrays. Both configurations are described in this section.
2.2.1

SCSI Cabling

2.2.1.1 Cable Lengths
The following table shows the lengths of each SCSI cable connected to the drive
connections on the controller module.
TABLE 2-5
SCSI Port Number
1
2
3
4
5
The inboard IN/OUT connectors on each disk array are terminated with a
differential SCSI terminator, part number 150-1890-xx.
Controller Module A (1x2)
Cable Length
.8m
.8m
.8m
.8m
Differential SCSI terminator
Part Number
530-1884-xx
530-1884-xx
530-1884-xx
530-1884-xx
150-1890-xx
Chapter 2 StorEdge A3500 Configurations 2-11