Using Menu - Epson 10020 User Manual

You can also request help information for more than one
command. Follow these steps:
1. At the command prompt, type
names of the commands you want information about. Then
press Enter. Separate each command name with a space.
For example, to see help information for the DISKCOPY,
FORMAT, and COPY commands, type the following and
press Enter:
HELP DISKCOPY FORMAT COPY
2. The help information for the first command is displayed
first. If there is more than one page of information about
the command, you see the prompt PgUp at the top of the
screen. Press PgUp to see more.
3. Press
command.
4. To exit the HELP program, press
information for the last command.

Using MENU

The MENU program lets you display a menu of MS-DOS
commands and select the one you need. MENU is easy to use
because you can execute commands without having to
remember the exact syntax for each command.
Follow these steps to access the MENU program:
1. Log onto drive C (if you have a hard disk) or insert the
Operating 2 diskette into drive A and log onto that drive.
3-36
Using MS-DOS With Your Computer
to see the help information for the next
ESC
HELP followed by the
after viewing the
E
SC