Chapter 2: Hardware Setup; Jumpers; Jp5: Cmos Clear Jumper; J25: Emi Ground Pin - SOYO 5EAS5 User's Manual & Technical Reference

2 Hardware Setup
This chapter is designed for Normal edition mainboard use only and it
explains how to configure the mainboardÕs hardware. After you install
the mainboard, you can set jumpers, install memory on the mainboard,
and make case connections. Refer to this chapter whenever you upgrade
or reconfigure your system.
CAUTION:
Turn off power to the mainboard, system chassis, and
peripheral devices before performing any work on the
mainboard or system.

Jumpers

JP5: CMOS Clear Jumper

Clear the CMOS memory by momentarily shorting pin 2Ð3; then
shorting pin 1Ð2 to retain new settings.

J25: EMI Ground Pin

J25 is designed for eliminating the EMI signals. Short or open J25 when
is needed.
CMOS Setting
Retain CMOS data
(default)
Clear CMOS data
JP5
1
1