SOYO SY-P4I845PE User Manual page 92

HighPoint hpt371 Driver Installation
NT4.0.
Install driver during Windows 2000 installation
1. Go to "D:\raid\hpt371\121\" directory, (assuming that
your CD-ROM is drive d) copy all the files and
directories to a floppy disk.
2. If Windows 2000 is installed from the floppy drive, please
let the installing program run automatically. If Windows
2000 is installed from the CD-ROM drive, please press the
F6 key when the message
third party SCSI or RAID driver
3. Press the
Windows 2000 Setup
4. Insert the floppy disk with the driver, then press
continue.
5. The system will ask whether to install the driver under
WinNT
driver under
6. In the next screen (Device Type), please select
press Enter
7. The next screen will list the devices to be installed, in which
HPT371 UDMA/ATA133 Controller
included (If users want to install other devices, please do so
at this time. If all devices have been successfully installed,
please go to next.)
Install driver during Windows XP installation
1. Go to "D:\raid\\hpt371\121\" directory, (assuming that
your CD-ROM is drive d) copy all the files and
directories to a floppy disk.
2. Booting from CD-ROM, when the
blue screen appears and prompts the user to press the F6
key to install third party SCSI or RAID driver, please press
S key to specify additional devices when the
window appears.
or under Windows
Windows 2000.
to continue.
Press F6 if you need to install
appears.
2000, please select to install the
item should be
Windows XP Setup's
88
SY-P4I845PE
Enter to
Other and