Cleaning; Notes On The Power Source - Aiwa HZ-WS2000 Operating Instructions Manual

Cleaning

Clean your player's casing with a soft cloth
slightly moistened with water or a mild
detergent solution.
Note
Do not use any type of abrasive pad, scouring
powder or solvent such as alcohol or benzene as it
may mar the finish of the casing.
Cleaning the headphone plug
If the headphone plug is dirty, it may cause
noise or sound skipping. To ensure good
sound quality, clean the headphone plug
periodically with a soft, dry cloth.
Notes on the power
source
• Use only the AC power adaptor supplied.
Do not use any other AC power adaptor. It
may cause a malfunction.
Polarity of the plug
• Do not touch the AC power adaptor with
wet hands.
• Connect the AC power adaptor to an easily
accessible wall outlet. Should you notice
an abnormality in the AC power adaptor,
disconnect it from the wall outlet
immediately.
• The player is not disconnected from the
AC power source (mains) as long as it is
connected to the wall outlet, even if the
player itself has been turned off.
• If you are not going to use the player for a
long time, be sure to disconnect the power
supply. To remove the AC power adaptor
from the wall outlet, grasp the adaptor
plug; never pull the cord.
• The AC power adaptor and the AC power
cord supplied with the player are dedicated
to the player. Do not connect them to a
device other than this player; doing so may
cause fire or shock hazard.
35