Step 2: Charge - Aiwa HZ-WS2000 Operating Instructions Manual

Portable hard disk player
Table of Contents

Advertisement

Step 2: Charge

First connect the AC power adaptor to the DC IN 5.2V jack on the player, and then connect to an
wall outlet.
You can start using the player while charging, with the AC power adaptor connected to the player
and to an wall outlet.
to an wall outlet
As charging proceeds, the red LED indicator on the player lights up, and the battery level
indication in the display changes as follows:
It usually takes about 1.5 hours* to charge the completely drained battery to 80 percent capacity.
At this point, "
" appears in the display and the LED indicator goes off.
After about 1.5 more hours*, the battery will be fully charged.
* When charging at room temperature. It takes more time for charging if the surrounding temperature is low.
When to charge the rechargeable battery
Check the remaining power of the battery occasionally when using the player without connecting
the AC power adaptor. The battery level indication in the display changes as follows:
Charge the battery when the battery level indication becomes "
Battery duration
Approximately 8 hours (fully charged)
8
to DC IN 5.2V
jack
AC power
adaptor
LED indicator
."

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents