Locking The Controls (Hold) - Aiwa HZ-WS2000 Operating Instructions Manual

Notes
• If the size of the current track exceeds the cache
capacity, the next track will be stored in the cache
instead of the current track.
• In Music Charger mode, you can only play tracks
stored in the cache repeatedly; you cannot enter
Shuffle play or Intro Scan play mode.
To exit Music Charger mode
Select "M. CHARGER ON" in step 2.
Tips
• When you exit Music Charger mode, settings for
the Repeat and Shuffle play modes are
maintained, while the Intro Scan play mode is
reset to "OFF," even if it was set to "ON."
• Music Charger mode will be retained even after
you turn off the power. However, if you slide and
hold the HOLD/POWER switch towards POWER
(press and hold NX on the player) for more
than 4 seconds until "Shut down" is displayed,
the Music Charger mode will be canceled.
Locking the controls
(HOLD)
When carrying the player in a bag, HOLD
function can be used to prevent accidental
pressing of the buttons.
Slide the HOLD switch in the direction
to the arrow.
On the remote control, slide the HOLD/
POWER switch in the direction to HOLD (to
the left position).
All operation buttons are disabled. If you
press a button while the HOLD function is
on, " HOLD" appears in the display and
the three LED indicators on the player flash
three times.
Player
HOLD off HOLD on
Remote control
The yellow mark becomes visible.
HOLD POWER
HOLD off
You can set the HOLD function separately
for the player and the remote control. For
example, you can set the HOLD function on
the player to on while the HOLD function on
the remote control off, so that you can
operate the player only with the remote
control.
The yellow mark
becomes
visible.
HOLD POWER
HOLD on
(Continued)
21