Specifications - Sony HT DDW1600 Operating Instructions Manual

If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver's memory may remedy
the problem (page 31). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
Reference sections for clearing
the receiver's memory
To clear
All memorized settings
Customized sound fields

Specifications

Amplifier section
Power Output
Models of area code SP, MX, E51, AU, AR, TH
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
Surround mode output (reference)
FRONT:
CENTER:
See
SURROUND:
page 31
page 54
SURROUND BACK:
1)
Measured under the following conditions:
Area code
AU, E51, SP, TH
MX
AR
2)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
3)
Measured under the following conditions:
Area code
AR
1)
1)
90 W + 90 W
3)
85 W + 85 W
2)
RMS output
185 W per channel
170 W per channel
(with SS-MSP16)
1)
185 W
3)
170 W
(with SS-CNP16)
185 W per channel
170 W per channel
(with SS-SRP16)
1)
185 W
3)
170 W
(with SS-SRP16)
Power requirements
240 V AC, 50 Hz
127 V AC, 60 Hz
230 V AC, 50 Hz
Power requirements
220 V AC, 50 Hz
continued
1)
3)
1)
3)
77 GB