Connecting A Tv - Sony HT DDW1600 Operating Instructions Manual

Connecting a TV

The image from a visual component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cables.
Connect video cords according to the jacks of
your components.
Audio signals
DIGITAL
OPTICAL
ANTENNA
SAT
IN
AM
VIDEO 2/
BD IN
COAXIAL
DVD
IN
DMPORT
L
R
OUT IN
D-LIGHT
SA-CD/CD/CD-R
SYNC OUT
A Audio cord (not supplied)
B Video cord (not supplied)
C Component video cord (not supplied)
TV
Video signals
A
DVD IN VIDEO 2/BD IN OUT
HDMI
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT
MONITOR
L L L
R R R
IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT
TV SAT DVD VIDEO 1 SUB WOOFER
Notes
• Connect image display components such as a TV
or a projector to the MONITOR OUT jack on the
receiver.
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
Tips
• You can watch the selected input image when you
connect the MONITOR OUT jack to a TV.
• To output the sound of the TV from the speakers
connected to the receiver, be sure to
– connect the audio output jacks of the TV to the
TV IN jack of the receiver.
– turn off or mute the TV's volume
B
Y
P /C
B B
P /C
R R
SAT IN DVD IN VIDEO 1 IN MONITOR OUT
COMPONENT VIDEO
L
R
FRONT
SPEAKERS
C
SURROUND BACK
L
R
SURROUND
CENTER
23 GB