Working With Photos On A Computer - Epson PhotoPC L-500V User Manual

Follow the steps below.
Caution:
c
Make sure the camera's power is turned off before you begin.
1. Open the connector cover carefully, and connect the PC cable from the camera to the computer.
Note:
Depending on the OS of your computer, you may have to install driver software. The driver software
can be found on the included CD-ROM.
2. Turn the camera on.
3. Use the included software to transfer the photos in your camera to the computer. For details,
see Chapter 6, "Operating the Software," page 65.
Note:
❏ If image software is not installed on your computer, you will only be able to copy the photos in your
camera to the computer. Image editing software is required to edit or manipulate the photos.
❏ When images that were taken using the P.I.F. mode are copied to your computer, the link between
the photos and the frames will be broken.

Working with photos on a computer

The CD-ROM includes software that enables you to manipulate the photos on your computer. For
details about the software, see Chapter 6, "Operating the Software," page 65.
54
Viewing and Managing Your Photos