Using Macro Mode - Epson PhotoPC L-500V User Manual

Epson digital camera user's guide
Hide thumbs Also See for PhotoPC L-500V:
Table of Contents

Advertisement

2. Press the shutter button halfway to set the focus, then press it fully. While the shutter button
remains fully pressed, photos will be taken continuously.
Note:
❏ You can change the camera settings freely the same as in the manual photography mode.
❏ If Quick View is on, the camera will usually display the most recently taken photo on the LCD
monitor for three seconds. However, in continuous photography mode, the camera briefly displays
the most recently taken photo, but holds the last photo for three seconds.
❏ If the LCD monitor is difficult to see in bright sunlight, select Outdoor mode. The camera will
automatically adjust the LCD monitor so that it is easy to see.

Using Macro Mode

The macro mode allows you to focus on subjects at distances between approximately 5 cm - 50 cm
(2 - 19.6 inches) from the camera.
When shooting objects that are 50 cm or more away from the camera, reset the camera to normal
mode.
1. Turn the Mode dial to
2. Move the joystick l (
,
or
.
macro) to switch to the macro mode.
37
Taking Photos
2
2
2
2
2
2
2
2
2
2

Advertisement

Table of Contents
loading

Table of Contents