Maintenance Schedule - Craftsman ZTS 7500 Operator's Manual

Zero-turn rear engine riders with electric start
Hide thumbs Also See for ZTS 7500:
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE
SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE,
All Models
Before
Spring
8
25
100
200
IYearly
Each Use
& Fall
Hours
Hours
Hours
Hours
Clean Debris from Rider and Engine Compartment *
®
Clean Debris from Engine Cooling Areas & Air Filter *
®
Check Tire Pressure
Lubricate Rider & Mower *
Clean Deck & Check/Replace Mower Blades
Clean Battery & Cables
Check Rider Safety System **
®
®
®
Check / Adjust PTO Clutch
ENGINE
MAINTENANCE,
8 Hours or
25 Hours or
50 Hours or
100 Hours or
Yearly
20HP Briggs
& Stratton
Daily
Every
Every
I Every
Season
Season
Season
Check Engine Oil Level *
Service Air Pre-Cleaner *
®
Change Oil *
Service Air Filter *
Change Oil & Filter *
Clean Cooling Fins *
Replace Air Filter *
Replace Spark Plug
®
Replace Fuel Filter 1
Check Valve Clearance 1
* More often in hot (over 85 ° F: 30 ° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
1 These services should be performed by Sears or other qualified service dealer.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

107.27786

Table of Contents