Service Safety - Craftsman 320.27683 Operator's Manual

Always check the tool for damaged parts before use. Before further
use of the tool, a guard or other part that is damaged should be carefully
checked to determine if it will operate properly and perform its intended
function. Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that may affect the tool's operation. A guard
or other part that is damaged should be properly repaired or replaced at a
Sears Service Center.
• Disconnect the plug from the power source and/or the battery from the
power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools, before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc., in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
A_, WARNING: When using power tools, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and personal injury.
WARNING: The operation of any tool can result in foreign objects being
propelled into your eyes, resulting in severe eye damage. When operating power
tool, always wear safety goggles or safety glasses with side shields and a full
face shield when needed.
A_, WARNING: If any parts are missing, do not operate the tool until the missing
parts have been replaced. Doing so could result in serious personal injury.
SERVICE SAFETY
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
• If any part of this router is missing or should break, bend, or fail in any
way; or should any electrical component fail to perform properly: shut off
the power switch and remove the plug from the power source and have the
missing, damaged, or failed parts replaced before resuming operation.
• Tool service must be performed only at a Sears Parts & Repair Service
Center. Service or maintenance performed by unqualified personnel could
result in a risk of injury.
27683 ManuaLRevised_11-0120 Page 7