Specifications - Craftsman 320.27683 Operator's Manual

_, WARNING: Do not allow familiarity with the router to cause a lack of alertness.
A fraction of a second of carelessness is enough to cause severe injury.
PRODUCT SPECIFICATIONS
Rating 12.0 Amps
No-Load Speed 10000-25000 RPM
Peak HP 2.0
Input 120V, 60Hz AC
Collets/Nuts and Cutter bit Shank
1/4 in. and 1/2 in.
Diameters
Fixed Base Diameter 6-inches
Plunge Base Diameter 6-11/16 inches
Sub-Base Opening (Diameter for cutter
bit use) 1-1/4 inches (for both bases)
Sub-Base Thickness 1/4 inch (6mm) (for both bases)
Fixed Base Depth of Cut 1-3/4 inches (45mm)
Plunge Base Depth of Cut 2-1/8 inches (55mm)
A_, WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
The Router Combo has the following features:
1. 12.0 Amp, 2 Peak HP, Variable Speed Motor runs at 10,000 to 25,000 RPM
(no-load speed).
2. Variable Speed Dial for matching the speed to the material and cutter bit size.
3. Electronic Feedback Circuitry provides soft starts for longer motor life and
maintains constant speed under load to help produce a high-quality finish in
all materials.
Quick-clamp System allows motor to be changed from the fixed to plunge
base and back without the use of tools.
4=
5. Fixed Base features Coarse and Micro-Depth Adjustments for accurate
set-ups.
6. Plunge Base features Fine and Micro Depth Rod Adjustments with Turret
Stops for precise set-ups and repetitive cutting.
7. Smooth Plunge Action lowers the bit into the workpiece at 90 ° for more
accurate cutting.
27683 Manual_Revised_11-0120 Page 13