Sears Craftsman 113.248211 Owner's Manual page 21

t
4. Loosen the setscrew which locks the blade guide
support and push the support all the way back.
Repeat for lower blade guide support.
UPPER BLADE /I I
SETSCREW -.----.--,t_*'_
__BLADE
UPPORT
.... _.... - ..... .... - SETSCREW
O
5. Loosen the setscrew which locks the upper back
up bearing and push the bearing all the way
back. Repeat procedure for lower back up bear-
ing.
_L,_ UPPER BACKUP
i _i BEARING SETSCREW
LOWER BACKUP .....
BEARING SETSCREW
WARNING: To avoid serious eye Injury or scrapes
if the blade should suddenly uncoil, wear safety
goggles. Carefully uncoil the blade holding it at
arms length.
6. Uncoil the blade.
7. Place the blade over the wheels with the teeth point-
ing downwards toward the table as shown. Make
sure the blade is between the blade guides and is in
the center ot the rubber tires.
NOTE: If the blade will not reach around both wheels,
lower the upper wheel by turning the tension knob
counterclockwise.
BLADE CENTERED
ON RUBBER TIRE
O
21