Table of Contents
Advertisement
SERVICE AND ADJUSTMENTS
TO ADJUST
HANDLE
(See Figs. 16 Thru 18)
Your fawn mower handle can be raised or lowered for' your
mowing comfort..
Four (4) positions are available:
high,
medium high, medium low and low. Handles are shipped
mounted in the medium low position_
o
To change from medium iow to medium high position,
the upper and lower handle sections will have to be
turned over (See Fig. 16B).
°
Remove the controls and operator presence control
bar from the upper handle,,
o
Remove the starter rope guide from the lower handle,
o
Remove hairpin cotters_
°
Disconnect the lower handle from the handle brackets
(See Fig° 18).
o
Turn the handle over' and reassemble the hairpin
cotters that have been removed°
°
Reassemble the starter rope guide°
.
Reassemble
the controls and the operator presence
control bar to the upper handte_
................
ill
ill
,
'
.......
CAUTION:
The operator
presence
control bar must pivot freely to permit
blade brake engagement when control
bar is released.
Do not over tighten the
fasteners
holding the controls to the
upper handle.
°
To change from medium low to high position only the
upper handle section will have to be turned over (See
Fig 17A).
•
To change from medium tow to low position, onty the
lower handle section will have to be turned over (See
Fig° 17B)o
SHIPPING
POSITION
MEDIUM LOW
MEDIUM HIGH
FIG. 16A
FIG. 16B
\
\
\
HIGH
LOW
FIG. 17A
FIG. 17B
LOWER HANDLE
SQUEEZE
TO REMOVE
HANDLE
BRACKET
HAIRPIN CLIP
FIG. 18
16
Advertisement
Table of Contents
