Craftsman 900.748280 Operator's Manual page 9

• To reattach the retaining bar, close the
bottom of the shoulder bag by folding
the bi-fotds flat as shown in figure 18.
Slide the retaining bar over the closed
bag.
/
[
i
WARNING: SHOCK HAZARD. DO
NOT POUR OR SPRAY WATER ON
THE TOOL IN AN ATTEMPT TO
CLEAN.
Do not store the toot on or adjacent to
fertilizers or chemicals. Such storage
can cause rapid corrosion of the metal
parts.
Use only mild soap and a damp cloth to
clean the toot. Never let any liquid get
inside the toot; never immerse any part
of the toot into a liquid.
CLEANING AND STORAGE
TURN OFF AND UNPLUG TOOL!
(Unplug extension cord at power
source.)
Use only mild soap and a damp cloth to
clean the toot. Clean out any clippings
which may have accumulated in the
Blower/Vac. When used properly with
dry leaves the fan chamber of your
Blower/Vac should remain clean. If
damp earth and debris are ingested
some of the particles may build up on
the inside of the fan chamber. If this
happens the performance of the unit wilt
decrease. This area can be cleaned out
using a wooden stick as shown in
figure 19 after disconnecting from the
power source. Your BtowerNac should
be stored in a dry place.