Download Print this page

Craftsman 900.748280 Operator's Manual page 5

Blower/vacuum with rake attachment

Advertisement

Available languages

Available languages

Toreduce t herisk ofelectric s hock, this
equipment hasapolarized plug (one
blade iswider than the other). This
equipment must b eused with asuitable
polarized 2 wire or3wire extension cord.
Polarized connections
will f ittogether
only one way. Make sure that t he
receptacle
end oftheextension cord has
large a nd small blade slot w idths. Ifthe
plug does not f itfullyinto the extension
cord, reverse theplug. Ifitstill d oes not
fit,obtain a suitable extension cord. I fthe
extension cord does not f itfully into the
outlet, contact aqualified electrician to
install theproper outlet. Donot c hange
the toot p lug orextension cord inany
way.
SAVE THESE INSTRUCTIONS
FOR FUTURE
USE
ASSEMBLY
FOR BLOW
MODE
A, WARNING: Before attempting any of
the assembly steps below, ensure
product is switched off and disconnected
from the power supply.
BLOW TUBE ASSEMBLY (FIGURES 1-4)
• Ensure fan cover grill is attached to the
power head. If not, attach cover as
shown in the inset of figure 1. NOTE:
Unit will not operate in blow mode without
fan cover grill in place. Align the upper
and lower tubes as shown in figure 1.
O
• Push the lower tube firmly into the upper
tube, until the tubes click into place.
• Blow tubes must be assembled to the
power head before use.
• Never operate without both lower and
upper tubes assembled.
• In the interest of safety, it is not intended
for the tubes to be separated once
assembled.
• Push the tube assembly onto the power
head until it is in the fully locked position
(figure 2).
Use the air concentrator attachment to
target air flow to a tighter area. Add the
attachment to the assembly as shown in
figure 3. Push on until hole in tab
engages raised post on tube.
• Use the turbo nozzle attachment to
rapidly move air back and forth to
remove stubborn debris from grassy
areas. Add the tube to the assembly as
shown in figure 4. Push on until hole in
tab engages raised post on tube. To lock
the turbo nozzle attachment and reduce
the back and forth motion, pushforward on
the locking tab.
O

Advertisement

loading

This manual is also suitable for:

900.74828