Install Ink Cartridges - Epson WorkForce 610 Series Quick Start Manual

4

Install ink cartridges

Note:
Don't load paper before installing the ink cartridges.
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges
gently 4 or 5 times, then
unpack them.
4
Remove only the yellow tape from each cartridge.
Caution:
5
Insert the cartridges in the
holder for each color.
6
Press each cartridge down until it clicks.
7
Close the ink cartridge cover and press it
down until it clicks.
8
Lower the scanner.
9
Press the OK button to charge the ink. Charging takes about 3 minutes.
Note:
Your product ships with full cartridges and part of the ink from the fi rst
cartridges is used for priming the product.
Caution:
waste ink.
Don't remove any other seals or the cartridges may leak.
Don't turn off the product while the ink system is charging or you'll