Cleaning The Print Head - Epson Stylus SX200 Series Basic Operation Manual

Cleaning the Print
Head
& 26
C R
Check nozzles.
Q
Make sure the printer is on and the
B light is off. Cleaning uses ink, so
only clean if quality declines.
Q
If it does not improve after cleaning four times, turn off the printer for at least six hours. Then try cleaning the print
head again. If quality does not improve, one of the ink cartridges may need to be replaced. If quality is a problem
after replacing the cartridges, contact your dealer.
A
Hold down y for 3 seconds.
B
Cleaning finished.