Table of Contents
Advertisement
3
Installation and uninstallation
You can install the Virtual-IO Manager on a central management station
(CMS) under Windows or Linux (see section
ager on a Windows-based CMS" on page 58
Manager on a Linux-based CMS" on page
Please check first the requirements for installing the Virtual-IO Manager on
CMS (see section
If a previous version is already installed on the management station, an
update installation runs automatically when you install the new version. All
previous VIOM configurations and definitions remain the same (see section
"Updating the Virtual-IO Manager on a Windows-based CMS" on page
and
"Updating the Virtual-IO Manager on a Linux-based CMS" on page
If you want to use the command line interface of the Virtual-IO Manager
(VIOM CLI), you must install the VIOM CLI software package. You will find
details on how to install and use VIOM CLI in the "Virtual-IO Manager Com-
mand Line Interface" manual.
3.1
Prerequisites for the VIOM installation
The requirements for installing the Virtual-IO Manager on a central man-
agement station are as follows:
Operating system for the central management station
l
o
o
o
o
o
o
o
o
ServerView Virtual-IO Manager
"Prerequisites for the VIOM installation" on page
Microsoft Windows® Server
Microsoft Windows® Server
Microsoft Windows® Server
Microsoft Windows® Server
Linux Novell (SLES10): SP2 and SP3
Novell (SLES 11): SP1 and SP2
Red Hat RHEL 5.6/5.7/5.8
Red Hat RHEL 6, 6.1/6.2
"Installing the Virtual-IO Man-
and
"Installing the Virtual-IO
73).
TM
2003 all editions
TM
2003 R2 all editions
TM
2008 all editions
TM
2008 R2 all editions
57).
72)
89.
57
Advertisement
Table of Contents
