Table of Contents
Advertisement
MB3887
USAGE PRECAUTIONS
• Printed circuit board ground lines should be set up with consideration for common impedance.
• Take appropriate static electricity measures.
Containers for semiconductor materials should have anti-static protection or be made of conductive material.
After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
Work platforms, tools, and instruments should be properly grounded.
Working personnel should be grounded with resistance of 250 k
• Do not apply negative voltages.
The use of negative voltages below 0.3 V may create parasitic transistors on LSI lines, which can cause
malfunction.
ORDERING INFORMATION
Part number
MB3887PFV
30
Package
24-pin plastic SSOP
(FPT-24P-M03)
to 1 M between body and ground.
Remarks
Advertisement
Table of Contents
